BULKFLEX injectable line
Aesthetic, lightweight and resistant dentures
Injectable materials in bulk
BULKFLEX is Deflex´s new line of injectable materials in bulk.
High quality thermoplastic polymers in bulk packaging allows for dispensing only the amount necessary for each denture.
Qualities
● Resistant materials
● Metal-free
● Minimal shrinkage
● High color stability
● Ease injection
Applications
● Partial dentures
● Full dentures
● Combined with chromium
● Over dentures
● Occlusal splints
MATERIALES
TENAZ
VERSÁTIL
ACRYNEL
ACETAL
TENAZ
SEMI-FLEXIBLE POLYAMIDE
- Highly resistant to breaking or deformation
- Very fluid, ease injection
- Translucency: medium
Recommended for flexible partials
Presentation: 250g y 500gColors: Medium pink (RM)
INJECTION PARAMETERS
| TEMPERATURE | INJECTION TIME | HOLDING TIME | AIR PRESSURE |
| 260ºC +/- 10ºC | 12 min | 1 min | 4,5 Kg/cm2 +/- 0.5 = 64 PSI +/- 7 |
VERSÁTIL
SEMI-RIGID POLYAMIDE
- Total versatility: excellent balance of elasticity and strength
- Allows for all types of design. Occlusal rests can be made
- High translucency. Easy to polish
Ideal for all types of partials
Presentation: 250g y 500gColors: Medium pink (RM) and transparent (TR)
INJECTION PARAMETERS
| TEMPERATURE | INJECTION TIME | HOLDING TIME | AIR PRESSURE |
| 275ºC +/- 10ºC | 15 min | 1 min | 4,5 kg/cm2+/-0,5 = 64 PSI +/- 7 |
ACRYNEL
INJECTABLE ACRYLIC
- Extra strength translucent acrylic
- Minimal shrinkage
- Adheres to normal acrylic (possibly of relining and additions using conventional materials and techniques) (*)
- Hypo-allergenic (**)
Prótesis totales livianas y resistentes
Presentation: 250g y 500gColors: Medium pink (RM) y Transparent (TR)
(*) Important: Apt for additions and relines using conventional materials and techniques.
(**) Meets the requirements of residual content of monomer established in EN ISO 20795-1:2013 (base polymers for dental prosthesis)
INJECTION PARAMETERS
| TEMPERATURE | INJECTION TIME | HOLDING TIME | AIR PRESSURE |
| 265ºC +/- 10ºC | 15 min | 1 min | 6 kg/cm2 +/- 1 = 86 PSI +/- 14 |
ACETAL
INJECTABLE ACETAL
- Partial denture frameworks and tooth-colored retainers
Colors: A2 – A3 – A3,5 – B3 – C3 – Medium pink
INJECTION PARAMETERS
| TEMPERATURE | INJECTION TIME | HOLDING TIME | AIR PRESSURE |
| 220ºC +/- 5ºC | 15 min | 1 min | 4,5 Kg/cm2 +/- 0,5 = 64 PSI +/- 7 |