Deflex Materials

Materials Catalog

M10 XR

M10M10 XR

Extra-rigid polymer

Greater stiffness and resistance Allows for reduced thickness and circumferential clasps.

Chemical bond with acrylic Possibility of relining and additions using conventional materials and techniques. Ideal for full dentures, overdentures and temporary dentures.

Minimal shrinkage High fidelity in all applications.

Super easy polishing and bright shine Saves working time. Optimal end result.

ANVISA Nº 80383780003


Diameters and dimensions

ø22mm

(x55mmx85mmx120mm)

ø25mm

(x70mmx90mm)

CLASSIC SR
FLUENCE SR
SUPRA SF
ACRILATO FD
ACETAL AC

Measurements, colors and weights

Measures Diameter Colors
M10 XR Small, Medium, Large 22mm / 25mm RS-RST-RM- RI-TR
CLASSIC SR Small, Medium, Large 22mm / 25mm RS-RI-RO-TR
FLUENCE SR Small, Medium, Large 22mm / 25mm RM-TR
SUPRA SF Small, Medium, Large 22mm / 25mm RM
ACRILATO FD Medium, Large 22mm / 25mm RM-TR
ACETAL AC Small, medium 22mm / 25mm A2-A3- A3,5-B3-C3
OSSIS TI Small, medium 22mm / 25mm BEIGE

  • Diameter: 22mm: Small 55mm (12,1 grs – 13,9 grs) / Medium 85mm (19,5 grs – 26 grs) / Large 120mm (26,6 grs – 31,6 grs)
  • Diameter 25mm: Medium 70mm (13 grs – 23,5 grs) / Large 90mm (25,9 grs – 30,5 grs)
  • Cartridges ready to be injected
  • Expiration: 18 months
  • Acrilato is not available in small cartridge of 22mm.
  • For very large prosthesis where the large cartridge is insufficient, consult for refill cartridges.
  • Ossis and Acetal are not available in large tubes of 22mm or 25mm.
  • Ask  for availability of materials, colors and complementary products by country.
  • The values of measurements and weights are nominal.

Injection parameters

PARAMETERS Temperature Time of injection Air pressure
M10 XR 305ºC +/- 10ºC 15 minutes 5-7 Bar / 72-101 PSI
CLASSIC SR 280ºC +/- 10ºC 15 minutes 5-7 Bar / 72-101 PSI
FLUENCE SR 275ºC +/- 10ºC 15 minutes 4-5 Bar / 58-72 PSI
SUPRA SF 260ºC +/- 10ºC 15 minutes 3 1/2 - 4 1/2 Bar / 50-65 PSI
ACRILATO FD 265ºC +/- 10ºC 15 minutes 5-7 Bar / 72-101 PSI
ACETAL AC 230ºC +/- 5ºC 15 minutes 5-7 Bar / 72-101PSI
OSSIS TI 390ºC +/- 5ºC 20 minutes 2,5 Bar / 36 PSI

(*) Important: Apt for additions and relines using conventional materials and techniques.
(**) Meets the requirements of residual content of monomer established in EN ISO 20795-1_2013 (base polymers for dental protheses)

Are you a laboratory or a distributor?

Contact us for more information and discover our products.